6
External input/output functions ALE-NC series operation manual
－
60
－
6-8
Communication setting
6-8-1
RS232C/USB
When connect with USB, communication setting of your PC is required.
Please refer to “Appendix 5 USB communication setup for PC”
(1)
Be sure to set <4*B EX MODE> to <<ON>> when connect with external customer display for retail
use.
(2)
For verified balance:
-
-
Setting menu <412 FORMAT> and <422 FORMAT> are not available. They are fixed to <<CBM>>
(CBM format) and other formats are not available;
Output conditions <<1>>, <<3>> and <<6>> are not available for <413 CONDITION> and
<423 CONDITION>.
1
Select the RS-232C communication
operation.
Press [Menu] key, then press [F1]-[F4] keys to
go to <411 ACTIVATE>.
Press [F4] key to change the setting value.
Press [F1]/[F2] key to select.
<<OFF>>: Stop
<<ON>>: Operation
Press [F4] key to fix.
Select the USB communication
operation.
Press [Menu] key, then press [F1]-[F4] keys to
go to <421 ACTIVATE>.
Press [F4] key to change the setting value.
Press [F1]/[F2] key to select.
<<OFF>>: Stop
<<ON>>: Operation
Press [F4] key to fix.
