Appendix ALE-NC series operation manual
－
88
－
Appendix 6
Balance operation with password control function
This chapter describes how to use the balance with “8-5-2 Password control”. This function is useful for
setting different authority for each user/guest.
Appendix 6-1
User’s authority setting
1
Power on the balance.
“Self-check”
Enable the <642 PASSWORD> and register the
administrator password in <643 SET ADMIN
PASS>, then power-off the balance.
Press [On/Off] key, then the balance shifts to
User login mode after start-up operation.
2
Go to the Administrator login mode.
Press [F4] key to go to “Administrator login
mode”.
<
> is indicated on the 7-segment
display.
3
Select the user to set the authority.
Select the user
<<0>>
：
Guest user
<<1>>
：
User 1
<<2>>
：
User 2
<<USER>>
：
Shift to the User login mode
4
Input the administrator password.
Input the administrator password by
pressing [F1]-[F4] keys.
Each digit increments as “0, 1, …, 8, 9, 0” by
pressing each [F] key.
First digit from the left
:
[F1] key
Second digit from the left
:
[F2] key
Third digit from the left
:
[F3] key
Fourth digit from the left
:
[F4] key
5
Start up the balance.
Press [Output] key.
When the password is authenticated, the balance
starts up.
