ALE-NC series operation manual Appendix
－
87
－
Appendix 5
USB communication setup for PC
1
Download the USB driver on your PC.
Go to the Website below and download the USB driver.
https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers
If you are unable to access the above address, please visit the Silicon Labs website
(
https://www.silabs.com
) and perform in-site search using the search term “CP210x USB to UART
Bridge VCP Driver”.
2
Install the USB driver on your PC.
Install the USB driver by referring to the Website.
3
Connect the balance to the PC.
Connect the balance with the PC and power on the balance.
4
Set the communication setting of the PC.
For Windows 10:
1) Right click the Windows icon and select “Device Manager” to open the “Device Manager”
window.
2) Click the “Port (COM and LPT)” to open the thread and double click the “Silicon Labs CP210x
USB to UART Bridge (COM*)” to open the properties window.
3) Go to the “Port” tab.
4) Input the communication setting in accordance with the communication settings of the balance
(See “6 External input/output functions”).
