ALE-NC series operation manual 2
Basic usage
－
15
－
2
Basic usage
2-1
Turning on/off the power, and checking for the operation
1
Turn on the power for the balance.
“Self-check”
“Initial zero adjustment”
Connect the included AC adapter to the
balance.
When the AC adapter is plugged in, the
balance enters the standby state and an
asterisk <
> appears.
Press [On/Off] key.
All displays on the LCD lights, followed by
the self-check of the balance. During the
self-check, the LCD display automatically
changes.
Completion of the self-check then initial
zero adjustment is followed by the weight
mode.
Do not press any key during the self-check.
2
Balance operation check.
Press the weighing pan lightly to check if
the indication changes.
3
Turn off the power of the balance.
Press the [On/Off] key long
(About 2 seconds).
(1) Pressing and holding [On/Off] key obtains the standby status from any operation status.
(2) When battery driven, the balance on/shutdowns without standby status.
(3) The balance starts up in the last measuring mode before it was switched off.
The verified balance always starts up in weighing mode.
