MVP3
SYSTEM BOARD
HARDWARE SETUP
3-7
(U)
PW
. Power Switch Connector
The PW connector shall be connected to the front panel PW button of your PC
system. When different type of switching power supplier is connected to the
mainboard, the PW button will have different functions:
1. When this mainboard has the ATX power supply connected, the PW connector
has two different functions according to the setup in CMOS. It can be the
Power Switch or Suspend Switch of your PC system. (please refer to Section-
4-7 for BIOS setup)
If the setup in CMOS is “Delay 4 Sec.”, the switch function will be
:
a). When system is power off :
Click on this switch, the system will be powered on.
b). When system power is on :
a. The system is in Full-ON mode :
a-1. Clcik on the PW switch ( less than 4 seconds ), the system will be
turned into Suspend mode. (turn into the GREEN mode)
a-2. Press and hold this switch for more than 4 seconds, the system will
be powered off immediately.
b. When the system is in Suspend mode :
b-1. Click on this switch ( less than 4 seconds ), the system will return
to Full-ON mode.
b-2. Press and hold this switch more than 4 seconds, the system will be
powered off.
