MVP3
SYSTEM BOARD
HARDWARE SETUP
3-2
3.2
HARDWARE CONFIGURATION
Before the system board is ready for operating, the hardware must be configured to
make sure it will work properly with different environment. To configure the system
board is a simple task, only a few jumpers, connectors, cables and sockets needs to
be selected and installed.
3.2.1
CONNECTORS
A connector is two or more pins that are used make connections to the system
standard accessories (such as power, mouse, printer,...etc.). The following is a list
of connectors on board, as well as descriptions of each individual connector.
(A) BAT1
Non-rechargeable battery (Using 3V Lithium battery : CR2032)
Pin # Assignment
+
Battery Positive
-
Ground
(B) CN2
AT Keyboard connector
Pin # Assignment
Pin # Assignment
1
Keyboard Clock
2
Keyboard Data
3
No Connection
4
Ground
5
+5V DC
(C) CN3
PS/2 Mouse connector
Pin # Assignment
1
●
1
Mouse Data
2
2
No Connection
3
●
3
Ground
4
●
4
+5V DC
5
●
5
Mouse Clock
