Vess R2000 SERIES, Product Manual

Page: 502 / 705

475
Product Manual Manage with CLU
• OutStandingR2T – Maximum number of R2T PDUs the target
can have outstanding for a single iSCSI command.
• MaxBurstLen – Maximum length of a solicited data sequence in bytes.
• DefTimeToWait – After a dropped connection, the number of
seconds to wait before attempting to reconnect.
• DefTimeToRetain – Number of seconds after time to wait
(above) before reassigning outstanding commands.
• HeaderDigest – Enables the use of header digest (CRC). Enabled or disabled.*
• DataDigest – Enables the use of a data digest (CRC). Enabled or disabled.*
• UniCHAPAuthen – Uni-directional (peer) CHAP authentication, enabled or disabled.*
• BiCHAPAuthen – Bi-directional (local) CHAP authentication, enabled or disabled.*
• FirstBurstLen
– First burst length in bytes.
• AssignedPortals – Portals assigned to this target.
• NOP-In: Check iSCSI connection status*
Items marked with an asterisk (*) are adjustable under “Making iSCSI Target Settings (CLU)” on page
475.
M
akiNg i
sCsi t
arget
s
ettiNgs
(Clu)
To make target settings:
1. From the Main Menu, highlight iSCSI Managemen t and press Enter .
2. Highlight iSCSI Targets and press Enter .
The list of iSCSI Targets displays.
3. Highlight the target you want to change and press Enter .
The target information screen displays.
4. Highlight iSCSI Target Settings and press Enter .
5. Make new settings as needed.
• Optional. Highlight TargetAlias and type an alias into the field provided.
• Highlight each item and press the Spacebar to toggle between Enable and Disable.
• HeaderDigest – Adds a header digest (CRC).
• DataDigest – Adds a data digest (CRC).
• UniCHAPAuthen – Enables uni-directional CHAP authentication.
• BiCHAPAuthen – Enables bi-directional CHAP authentication.
Authentication requires a pre-existing CHAP.