Vess R2000 SERIES, Product Manual

Page: 501 / 705

474
Vess R2000 Series Product Manual Promise Technologies
V
iewiNg a
l
ist oF i
sCsi t
argets
(Clu)
A target is a logical drive on the Vess R2000 subsystem.
The default target exposes all logical drives and is associated with all portals on the subsystem.
To view a list of iSCSI targets:
1. From the Main Menu, highlight iSCSI Management and press Enter .
2. Highlight iSCSI Targets and press Enter .
The list of iSCSI Targets displays.
• ID – Target number. 0 is the default target.
• Alias – User assigned name of the target
• AssignedPortals – portals assigned to the target
V
iewiNg i
sCsi t
arget
i
NForMatioN
(Clu)
To view information for an iSCSI target:
1. From the Main Menu, highlight iSCSI Managemen t and press Enter .
2. Highlight iSCSI Targets and press Enter .
The list of iSCSI Targets displays.
3. Highlight the target you want to change and press Enter .
The target information screen displays. Information includes:
• TargetName – iSCSI qualified name (iqn) of this target.
• TargetAlias
– Maximum of 32 characters. Use letters, numbers,
space between words, and underscore. An alias is optional.*
• TargetStatus – Up or down.
• ErrorRecovLevel – Error recovery level supported.
• ImmediateData – Enables the initiator to send unsolicited
data with the iSCSI command PDU.
• MaxConnection – Maximum number of connections.
• DataPDUInOrder – Enables placement of data in PDU order.
• InitialR2T – Allows initiator to begin sending data to a target
without receiving a ready to transfer command.
• DataSeqInOrder – Enables placement of data in sequential order.