Vess R2000 SERIES, Product Manual

Page: 101 / 705

M
Aking
v
irtuAl
M
AnAgeMent
P
Ort
s
ettings
– M
AnuAlly under
iP
v
6 (cli)
To make IPv6 settings manually on the management port:
1. At the command prompt, type net -a enable -f ipv6 and press Enter to enable IPv6 on the Vess R2000.
After a moment, the comand prompt reappears, indicating that your setting was successful.
administrator@cli>
2. At the command prompt, type net -a mod -f ipv6 -s “ followed by:
• primaryip= and the IP address ,
• primaryipmask= and the subnet mask ,
• primarydns= and the DNS server IP address ,
• gateway= and the Gateway server IP address
“ and press Enter.
Example :
administrator@cli> net -a mod -f ipv6 -s
“primaryip=2001:0db8:85a3:0000:0000:8a2e:0370:7334,
primaryipmask=2001:0db8:fedc:ba98:7654:3210:0246:8acf
primarydns=2001:0db8:85a3:0000:0000:8a2e:0370:7001,
gateway=2001:0db8:85a3:0000:0000:8a2e:0370:7002”
After a moment, the comand prompt reappears, indicating that your setting was successful.
administrator@cli>
3. To verify the settings, at the command prompt, type net -a list -v and press Enter.
The following information displays:
administrator@cli> net -a list -v
-------------------------------------------------------------
---------------
ActiveCtrlId: 1 Port: 1
MaxSupportedSpeed: 100Mbps LinkStatus: Up
ProtocolFamily: IPv4(Enabled) DHCP: Disabled
IP: 10.0.0.1
IPMask: 255.255.255.0
MAC: 00:01:55:61:18:65
DNS: 10.0.0.11
Gateway: 10.0.0.1
ProtocolFamily: IPv6(
E
nabled) DHCP: Disabled
IP: 2001:0db8:85a3:0000:0000:8a2e:0370:7334
IPMask: 2001:0db8:fedc:ba98:7654:3210:0246:8acf
MAC: 00:01:55:61:18:65
74
Vess R2000 Series Product Manual Promise Technologies