Vess R2000 SERIES, Product Manual

Page: 330 / 705

303
Product Manual Managing with the CLI
Table of Supported Commands (Continued)
Command Action
sasdiag SAS diagnostic command.
sas
View or edit SAS host interface port information and settings. SAS host
interface product only.
sc View spare check status. Start spare check.
scsi
View or edit parallel SCSI information and settings. Parallel SCSI host
interface product only.
session View the list of active sessions.
shutdown Shutdown or restart system.
smart
S.M.A.R.T diagnostic for physical drives.
spare Create or modify hot spare drives.
stats View or reset statistics.
subscription
View, modify, enable or disable event notification.
subsys View or edit subsystem information and settings.
swmgt View, start or stop software component.
sync View logical drive synchronization status and progress.
topology
View SAS topology, the physical connections and device information. For
products that support multiple enclosures only.
transit
View transition status and progress. Start, stop, pause, or resume a
transition process.
trunk View, modify, add or delete port trunk configuration for iSCSI host interface.
ups View or modify UPS information and status.
user List, modify, create and delete user accounts on subsystem.
zoning List, modify SAS zoning on subsystem.
Note : Commands are NOT case sensitive.