Vess R2000 SERIES, Product Manual

Page: 271 / 705

244
Vess R2000 Series Product Manual Promise Technologies
Information includes:
• Session ID – ID number of the session
• Status – Active or inactive
• Target Alias
• Initiator Name – iSCSI qualified name
(iqn)
• Portal IP – IP address of the portal
• Device Type – Initiator or target
• Target Portal Group – ID number
• TSIH – Target session identifying handle
• Execution Throttle – Max number of
outstanding commands on any one port
• Max Outstanding R2T – Number of PDUs
ready to transfer
• Default Time to Retain – In seconds
• Max Burst Length – In bytes
• Initial R2T – Enabled or disabled
• Data Digest – Enabled or disabled
• Data PDU in Order – Enabled or disabled
• Portal ID – ID number of the portal
• Keep Alive – Enabled or disabled
• Target Name – iSCSI qualified name (iqn)
• Initiator IP – IP address of the initiator
• Device Access Control – Enabled or disabled
• Initiator Source Port – ID number
• ISID – Initiator session ID number
• Max Rcv Data Seg Length – Receive data
segment length
• First Burst Length – In bytes
• Default Time to Wait – In seconds
• Immediate Data – Enabled or disabled
• Header Digest – Enabled or disabled
• CHAP Authentication Type – None, Local,
Peer
• Data Seq in Order – Enabled or disabled