Vess A2200 Product Manual Download Page 96

Page: 96 / 255

Vess A2000 Series

Product Manual

Under Physical Drive, choose the metric you want to see from the Measurement drop-down menu.

Check the boxes for the physical drives you want to see.

• Total of all physical drives

• Up to 4 devices

• I/Os per second

Since the performance monitor is a real-time display, it does not accumulate information and there is no clear

or save function.

To save performance statistics for analysis or troubleshooting, save a Service Report. See “Saving a Service

Report”.

Information

• Bandwidth in MB/s

• Maximum latency in ms

• Average latency in ms

• Minimum latency in ms

• I/Os per second

Read/Write

• Read bandwidth

• Write bandwidth

• Maximum Read latency in ms

• Maximum Write latency in ms

• Average Read latency in ms

• Average Write latency in ms

• Minimum Read latency in ms

• Minimum Write latency in ms

Summary of Contents for A2200
































































































































































































































































Search results

Summary of Contents for A2200

Reviews:

Brands by name

Popular brands

Vess A2200, Product Manual

Search results

Summary of Contents for A2200

Reviews:

Brands by name

Popular brands