Vess A2200 Product Manual Download Page 35

Page: 35 / 255

NSTALLING

ISK

RIVES

The Vess A2000 Series subsystems support:

• SATA hard disks

• 3.5-inch hard disk drives

For a list of supported physical drives, download the latest compatibility list from the PROMISE

support website

UMBER

RIVES

EQUIRED

The table below shows the number of drives required for each RAID level

Level Number of Drives

RAID 0

1 or more

RAID 6

4 to 32

RAID 1

2 only

RAID 10

4 or more*

RAID 1E

2 or more

RAID 30

6 or more

RAID 3

3 to 32

RAID 50

6 or more

RAID 5

3 to 32

*Must be an even number of drives.

Caution

The Vess supports disk drive hot-swapping. To avoid hand contact with an

electrical hazard, do not remove more than one drive carrier a time.

Promise Technologies

Hardware Setup

Summary of Contents for A2200
































































































































































































































































Search results

Summary of Contents for A2200

Reviews:

Brands by name

Popular brands

Vess A2200, Product Manual

Search results

Summary of Contents for A2200

Reviews:

Brands by name

Popular brands