Vess A2200 Product Manual Download Page 95

Page: 95 / 255

Promise Technologies

Management with WebPAM Pro

ERFORMANCE

ONITORING

The Performance Monitor displays real-time performance statistics for logical drives and physical drives. The

vertical scale adjusts dynamically to accommodate the statistical data.

Because it reports performance in real-time, to see data in the monitor, there must be I/O data activity taking

place between the subsystem and the Host.

To monitor performance:

1. Click the

Administrative Tools

icon.

2. Click the Performance Monitoring icon.

Click the Information tab for aggregated statistics; or choose the Read/Write tab to view speciﬁ c Read

and Write performances separately.

Under Logical Drive, choose the metric you want to see from the Measurement drop-down menu.

Check the boxes for the logical drives you want to see.

• Total of all logical drives

• Up to 4 devices

Information

• Bandwidth in MB/s

• Cache usage by %

• Dirty cache usage by %

• Maximum latency in ms

• Average latency in ms

• Minimum latency in ms

• I/Os per second

Read/Write

• Read bandwidth

• Write bandwidth

• Maximum Read latency in ms

• Maximum Write latency in ms

• Average Read latency in ms

• Average Write latency in ms

• Minimum Read latency in ms

• Minimum Write latency in ms

Summary of Contents for A2200
































































































































































































































































Search results

Summary of Contents for A2200

Reviews:

Brands by name

Popular brands

Vess A2200, Product Manual

Search results

Summary of Contents for A2200

Reviews:

Brands by name

Popular brands