Vess A2200 Product Manual Download Page 46

Page: 46 / 255

PSU1, PSU2 and PSU3

PSU status LEDs

Vess A2200 N+1 PSUs

Vess A2600 N+1 PSUs

The Vess A2600 and Vess A2200 feature three N+1 power supplies. In this arrangement, one PSU is redundant,

so a minimum of two PSUs are needed to power up the enclosure.

Vess A-2600 N+1 power connecti ons

Each PSU has a Status LED. After boot up, check the LEDs on each power supply on the back of the device.

These LEDs will light green to indicate normal operation. A red LED indicates a problem or unit failure.

Important

There are three LED indicators on the N+1 power supplies. Check

these after powering the devices on to make sure the cooling and

power status for the power module is normal.

Vess A2000 Series

Product Manual

Summary of Contents for A2200
































































































































































































































































Search results

Summary of Contents for A2200

Reviews:

Brands by name

Popular brands

Vess A2200, Product Manual

Search results

Summary of Contents for A2200

Reviews:

Brands by name

Popular brands