Vess A2200 Product Manual Download Page 165

Page: 165 / 255

Deleting a U ser (CLU)

The Administrator or a

Super User

can delete other users. You cannot delete the account you used

to log in. There must always be one

Super User

account.

Rather than deleting a user, consider disabling a user account.

To delete a user:

1. Log in under a user name other than the one you want to delete.

Main Menu

Additional Info and Management

User Management

3. Highlight the user you want to delete and press the spacebar to mark it.

The mark is an asterisk (*) to the left of the listing.

4. Highlight

Delete Marked Users

and press

Enter

Press Y to conﬁ rm the deletion.

159

Promise Technologies

Management with CLU

Summary of Contents for A2200
































































































































































































































































Search results

Summary of Contents for A2200

Reviews:

Brands by name

Popular brands

Vess A2200, Product Manual

Search results

Summary of Contents for A2200

Reviews:

Brands by name

Popular brands