Vess A2200 Product Manual Download Page 211

Page: 211 / 255

205

Promise Technologies

Management with CLI

rlacache= Enables or disables read look ahead cache on the physical drive(s).

enable

disable

cmdqueuing=

Enables or disables command queuing on the physical drive(s).

enable

disable

temppollint=

(15-255 ) Drive temperature polling interval in seconds. If value is 0, polling is

disabled. For high availability products only.

mediumerrorthreshold= (0-4294967294 ) Medium error threshold. If the threshold is reached,

the physical drive is marked as dead. The default value is 0, indicating that physical drive is not

marked as dead for medium errors. For high availability products only.

-v

Verbose mode. Used with -a list.

Examples

phydrv

phydrv -v

phydrv -a locate -p 9

phydrv -a mod -s “writecache=enable,rlacache=enable”

phydrv -a ofﬂ ine -p 8

phydrv -a online -p 8

Summary of Contents for A2200
































































































































































































































































Search results

Summary of Contents for A2200

Reviews:

Brands by name

Popular brands

Vess A2200, Product Manual

Search results

Summary of Contents for A2200

Reviews:

Brands by name

Popular brands