Vess A2200 Product Manual Download Page 10

Page: 10 / 255

ARDWARE

The following section provides a summary of the front and back panel hardware features of the Vess A2000

Series enclosures.

RONT

ANEL

ARDWARE

The front panel of Vess A2000 Series enclosures provide access to drives carriers. Some A2000 Series units are

shipped with secure covers to protect the drive carriers from being unintentionally removed.

For all Vess A2000 Series enclosures, defective drives can be replaced without interruption of data availability to

the host computer. If so conﬁ gured, a hot spare drive will automatically replace a failed drive, securing the fault-

tolerant integrity of the logical drive. The self-contained hardware-based RAID logical drive provides maximum

performance in a compact external enclosure.

Vess A2000 Series

Product Manual

Summary of Contents for A2200
































































































































































































































































Search results

Summary of Contents for A2200

Reviews:

Brands by name

Popular brands

Vess A2200, Product Manual

Search results

Summary of Contents for A2200

Reviews:

Brands by name

Popular brands