Vess A2200 Product Manual Download Page 151

Page: 151 / 255

Note

If you did not use all of the available capacity of the disk array, you can

create an additional logical drive at this point.

Deleting a Logical Drive (CLU)

To delete a logical drive from a disk array:

Main Menu

Disk Array Management

2. Highlight the disk array that contains the logical drive you want to delete and press

Enter

3. Highlight

Logical Drives in the Disk Array

and press

Enter

4. Highlight the logical drive you want to delete and press the spacebar to mark it.

The mark is an asterisk (*) to the left of the listing.

5. Highlight

Delete Marked Logical Drives

and press

Enter

Press Y to conﬁ rm the deletion.

Press Y again to re-conﬁ rm.

Caution

When you delete a logical drive, you delete all the data it contains.

Back up all important data before deleting a logical drive.

145

Promise Technologies

Management with CLU

Summary of Contents for A2200
































































































































































































































































Search results

Summary of Contents for A2200

Reviews:

Brands by name

Popular brands

Vess A2200, Product Manual

Search results

Summary of Contents for A2200

Reviews:

Brands by name

Popular brands