Vess A2200 Product Manual Download Page 236

Page: 236 / 255

230

Vess A2000 Series

Product Manual

ESS

2600 S

TATUS

LED

The Vess 2600 has hard drive status and activity LEDs on each drive carrier. Also check

the status indicators on the right side of the front of the device for clues about what is

wrong.

Vess A2600 Status LED behavior

HDD Status

The Disk Status LED displays GREEN when a drive is conﬁ gured and working properly. When the

lights are RED the HDD requires manual replacement. When ORANGE is observed it indicates

background RAID activity on this particular HDD and no user action is required.

System Status

Lights GREEN when healthy, RED if there is a critical problem (LD ofﬂ ine, fan malfunction, voltage

out of range, system temperature alert), blinks RED for HDD high temperature alert remains dark

when not ready. This will be RED if a hard drive has failed or has critical errors. Replace the drive

corresponding to the RED HDD Status indicator.

Global RAID

Status

Lights GREEN when healthy or RED if any RAID volume is ofﬂ ine, ORANGE for critical state of

any logical drive. If a hard drive has failed, this will be ORANGE. In this case, it will be necessary to

replace the affected drive and rebuild the affected RAID volume.

Red Drive Status (Replace this drive)

Activity (dark), under normal conditions this will

ﬂ ash blue color when there is activity on the drive.

Vess A2600 hard drive carrier front LEDs

Global RAID Status

System Status

Vess A2600 status LEDs on right side of front

Summary of Contents for A2200
































































































































































































































































Search results

Summary of Contents for A2200

Reviews:

Brands by name

Popular brands

Vess A2200, Product Manual

Search results

Summary of Contents for A2200

Reviews:

Brands by name

Popular brands