manualshive.com logo in svg

Vess A2200, Product Manual

Share
Download
Vess A2200 Product Manual Download Page 28

 M

OUNTING

 

A

 3U 

ENCLOSURE

 

IN

 

A

 R

ACK

To install the Vess into a rack with the supplied mounting rails:

1. 

Check the fi t of the mounting rails in your rack system.

2.  Adjust the length of the mounting rails as needed.

•  The rear rail slides inside the front rail. The rail halves are riveted together and use no adjustment 

screws.

•  The front-left and front-right mounting rail ends are labeled.

•  Be sure the front rail support is on the bottom facing inward.

Installing the rails onto the rack

•  All rail ends, front and rear, attach at the outside of the rack posts.

•  The guide pins at the rail ends align with the holes in the rack posts.

•  Use the attaching screws and fl ange nuts from your rack system. Tighten the screws and nuts according 

to instructions for your rack system.

Support fl ange on the front 

end of each rail

Front right label

Front left label

Guide pins on rails align with holes in the rack post

22

Vess A2000 Series    

 

 

 

 

 

 

 

 

          Product Manual   

Summary of Contents for A2200
































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands