Hint:
To change the settings for a profile you must activate the
profile first. Do this from the main menu on the situation display
before entering setup mode.
Target speed filter
This specifies the minimum SOG (in knots)
that a target must be moving to be included in
the target list. Targets moving slower than
this speed will be filtered from the target list
and will not appear.
Use this filter to eliminate slow or stationary
targets from the target list. Alarms are not
triggered for filtered targets.
The total count of filtered targets is displayed
on the Home Page.
Selecting “
OFF
” disables the target speed
filter.
If this setting is higher than the “CPA alarm -
Target Speed” setting a warning is displayed
to indicate you may be filtering more targets
than you intend.
It is not recommended to set this value too
high since it may filter out all targets and
alarms.
Target range filter
This specifies the maximum range (distance
in nautical miles) for a target to be included
in the target list. Targets farther away will be
- 55 -