Setup Mode
Setup mode is entered by selecting Setup from the main menu on the
situation display. In setup mode the list of available settings is
displayed. Scroll through the list and select the setting you wish to
change. A pop up box is displayed with the available options for that
setting.
Note:
Filter and alarm settings are associated with a profile and only
the settings in the currently active profile may be changed. If you
wish to change the settings for a different profile, you must select the
profile before entering setup mode.
While the settings screen is displayed, you can use the following
buttons:
▲
Highlight the previous setting. This button is only active if
it is possible to scroll up.
▼
Highlight the next setting. This button is only active if it is
possible to scroll down.
Select Change the highlighted setting.
Home Save any changes and return to the Home Page.
Any changes you make to settings are stored permanently until you
change them again, even if you turn off the power.
General Settings
The following settings may be changed at any time. These settings
are not associated with a profile and apply to all profiles. For
information about settings associated with profiles, see the next
section.
- 49 -
