Figure 5.3 vKVM Preference
To remove an SP:
1.
From the sidebar, click
Targets - SP
Management,
then click the
Service Processors
tab.
2.
In the SP list, select the SP(s) you want to remove and click
Delete
.
Access settings
Access settings define the TCP ports that will be used when providing a remote user with an SP Access session (i.e. vKVM,
vMedia, browser, SSH and Telnet).
Multiple ports are dynamically allocated from this customizable range for each SP session. The time-out for these sessions
can be configured.
For more information, see
5.7.4 Firmware upgrade and repository
For supported SPs, an administrator can view and upgrade firmware as well as store firmware either locally on the appliance
or remotely through the network share.
To add SP firmware to the repository:
1.
From the sidebar of the Administration tab, click
Targets - SP
Management
, then click the
Firmware Repository
tab. The page displays all the firmware stored in either the local or remote repository.
2.
Click
Add
to add new firmware to the repository.
3.
Use the drop-down menu to store the firmware locally on the appliance or remotely via the network share.
4. Use the drop-down menu to select the firmware profile and enter a firmware version or comment as desired.
5.
Click
Upload
, then browse to where the firmware is stored and click
Open
to upload it.
To delete SP firmware from the repository:
1.
From the sidebar of the Administration tab, click
Targets - SP
Management
, then click the
Firmware Repository
tab. The page displays all the firmware stored in either the local or remote repository.
2.
Check the box next to the firmware you want to delete and click
Delete
.
To view or upgrade firmware for supported SPs:
1.
From the sidebar of the Administration tab, click
Targets - SP
Management
, then click the
Firmware Upgrade
tab.
Vertiv
| Avocent® Universal Management Gateway Appliance Installer/User Guide |
45
