Vertiv Avocent Installer/User Manual Download Page 24

Page: 24 / 117

ORDER

SERVICE

ACTION

USE-CASE RECOMMENDATION

srv-SNMP-Traps

Only needed if monitoring SNMP devices for the

Trellis™ platform or managing NetPDUs.

srv-Adobe-Flex

Needed to access the appliance web UI, set to DROP to disable the web UI.

srv-DSView-proxy

Needed to access appliance targets with DSView™ software, set to DROP to disable DSView™ software
support.

srv-DSView-plug-in

Needed to access/manage the appliance with DSView™ software, set to DROP to disable DSView™
software support.

srv-Data-logging-
DSView

Needed to monitor the appliance with the DSView™ software, set to DROP to disable DSView™ software
support.

srv-Discovery-
protocol

Needed to discover the appliance with the DSView™ software, set to DROP to disable DSView™
software support.

srv-DRIP-protocol

Needed on private ports to discover and manage UMIQ modules, set to DROP to disable KVM support.

srv-Security-protocol

Needed to access/manage the appliance with the DSView™ software, set to DROP to disable DSView™
software support.

srv-PXE-boot-server

Not needed for current appliance features, set to DROP.

srv-Trellis-Platform-
OHS

Needed for

Trellis™ platform software management and monitoring support, set to DROP if not using

Trellis™ platform software.

srv-Trellis-Event

Needed for

Trellis™ platform software management and monitoring support, set to DROP if not using

Trellis™ platform software.

srv-Trellis-Event-2

DROP

Don't change this default for any reason.

srv-UMG-Service-1

DROP

Don't change this default for any reason.

srv-UMG-Service-1

DROP

Don't change this default for any reason.

srv-UMG-Service-2

Needed for

Trellis™ platform software management and monitoring support, set to DROP if not using

Trellis™ platform software.

srv-UMG-Service-4

Needed for

Trellis™ platform software management and monitoring support, set to DROP if not using

Trellis™ platform software.

srv-UMG-Service-5

Needed for

Trellis™ platform software management and monitoring support, set to DROP if not using

Trellis™ platform software.

srv-UMG-Service-6

Set to DROP.

srv-UMG-Service-7

Needed to support KVM sessions to UMIQ modules, set to DROP to disable KVM support.

srv-UMG-Service-8

Needed to access the appliance web UI, set to DROP to disable the web UI.

srv-UMG-Service-8

DROP

Needed only by the local host for the VGA console, Don't change this default for any reason.

srv-UMG-Service-9

DROP

Needed only by the local host for the VGA console, Don't change this default for any reason.

srv-UMG-Service-10

Needed for direct serial port access using Telnet, set to DROP in not using Telnet.

srv-UMG-Service-11

Set to DROP.

srv-UMG-Service-12

DROP

Don't change this default for any reason.

srv-UMG-Service-13

DROP

Don't change this default for any reason.

srv-Velocity-BACNet

Only needed if monitoring BACnet over IP devices for the

Trellis™ platform, set to DROP if not using the

Trellis™ platform.

srv-Modbus

Only needed if monitoring Modbus over IP devices for the

Trellis™ platform, set to DROP if not using the

Trellis™ platform.

srv-DNS

Needed to support DNS resolution, set to DROP to block DNS support.

srv-KVM-session

Needed to support KVM sessions to UMIQ modules, set to DROP to disable KVM support.

srv-KVM-session

Needed to support KVM sessions to UMIQ modules set to DROP to disable KVM support.

512

Any

DROP

Needed to protect general packet relay, not recommended to be changed

Vertiv

| Avocent® Universal Management Gateway Appliance Installer/User Guide |

Summary of Contents for Avocent






















































































































Search results

Summary of Contents for Avocent

Reviews:

Brands by name

Popular brands

Vertiv Avocent, Installer/User Manual

Search results

Summary of Contents for Avocent

Reviews:

Brands by name

Popular brands