ITEM
DESCRIPTION
ITEM
DESCRIPTION
1
Power supplies
11
DSView server
2
Ethernet connection
12
Remote authentication
3
User
13
PC client
4
External sensors connection
14
USB media
5
Autosensing ports for serial or service processor targets
15
RJ45 serial setup port
6
UMIQ module for KVM connection
16
DB9 com port
7
Target server (VGA/USB)
17
PC for local configuration
8
Firewall
18
USB connection (keyboard, mouse or media)
9
Ethernet connection
19
VGA console port
10
Local Area Network (LAN)
20
LCD tray for local configuration and access
Table 2.3 Typical Avocent® Universal Management Gateway Appliance Configuration Descriptions
2.7.1 Using Telnet or SSH to access a serial target
An authorized user can use a Telnet or SSH client to make a connection directly to the console of a serial target if all of the
following are true.
The Telnet or SSH:
•
protocol is enabled for network service in the security profile
•
protocol is configured for the port
•
client is available, and it is enabled on the computer from which the connection is made
To use Telnet to connect to a target through a serial port:
For this procedure, you need the username configured to access the serial port, the target name (for example, 14-35-60-p-1),
device name (for example, ttyS1), TCP port alias (for example, 7001) and the hostname of the appliance or its IP address.
To use a Telnet client, enter the information in the dialog boxes of the client.
-or-
To use Telnet in a shell, enter the following command:
# telnet [
hostname
|
IP_address
]
login:
[username]:[targetname | device_name]
-or-
# telnet [hostname | IP_address] TCP_Port_Alias
login:
[username]
To close a Telnet session:
Enter the Telnet hotkey defined for the client. The default is
Ctrl + q
to quit.
To use SSH to connect to a target through a serial port:
For this procedure, you need the username configured to access the serial port, the target name (for example, 14-35-60-p-1),
TCP port alias (for example, 7001), device name (for example, ttyS1), and the hostname of the appliance or IP address.
To use an SSH client, enter the information in the dialog boxes of the client.
-or-
To use SSH in a shell, enter the following command:
Vertiv
| Avocent® Universal Management Gateway Appliance Installer/User Guide |
12
