VERITEQ vLog 4.4 User Manual Download Page 81

Page: 81 / 112

Veriteq vLog 4.4 User’s Guide

To export graph data to .txt or .csv files:

1. By default, date and time are exported in a single column.

To have date and time exported into separate columns:

Select

Tools>Options

, then choose the

General

tab.

b. Select the

Export the date and time in separate columns

option.

Click

2. To export the file, choose

File

Export...

The File Save As window opens.

3. Navigate to the location where you want to save the file.

4. In the

File name

box, type the desired file name.

5. In the

Save as type

box, accept the default

CSV (comma-separated val-

ues)(.csv)

file type, or select

Text (Comma delimited)(*.txt)

. You can

readily import either file format into most popular spreadsheet and data-
base programs for further analysis and manipulation.

6. Click

Save

Saving Graphs

To save changes to a graph file (.spg) for later use:

1. Choose

File>Save

File>Save As

2. Navigate to the location to save your file, enter a file name, and click

Save

To export graph data, use File Export and see

Exporting Graph Data

on page

74.

Summary of Contents for vLog 4.4

















































































































Search results

Summary of Contents for vLog 4.4

Reviews:

Brands by name

Popular brands

VERITEQ vLog 4.4, User Manual

Search results

Summary of Contents for vLog 4.4

Reviews:

Brands by name

Popular brands