manualshive.com logo in svg

VERITEQ vLog 4.4, User Manual

Share
Download
VERITEQ vLog 4.4 User Manual Download Page 77

Veriteq vLog 4.4 User’s Guide

71

To set sample smoothing:

1. Select 

Tools>Options

, then choose the 

Insert

 tab.

2. Under 

Sample smoothing (in raw counts)

, select one of the following op-

tions.

3. Click 

OK

.

Adding Horizontal Lines to Graphs

Horizontal lines add value to vLog graphs by showing maximum, minimum, 
and average values, as well as indicators as chosen by you.

Maximum, minimum and average value lines can be added automatically, or 
you can customize the lines to add.

To add lines automatically, your graph must only be showing one unit type, 
such as temperature 

or

 humidity. Maximum, minimum and average values will 

be marked, including the time and date the maximum and minimum were 
achieved.

You can also add lines manually, such as adding lines to show when a particular 
threshold has been reached, or to add lines to graphs where more than one unit 
type is displayed.

Zero

Produces the most responsive graph, but makes 
the recorded readings susceptible to noise

One (default)

Suitable for most applications

Two

Decreases input noise and produces a more sta-
ble graph

Summary of Contents for vLog 4.4

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands