manualshive.com logo in svg

VERITEQ vLog 4.4, User Manual

Share
Download
VERITEQ vLog 4.4 User Manual Download Page 54

Transferring Logger Files

48

Configuring Transfer with Username and Password - NOT RECOMMENDED

In vLog 4.10 and later, the Logger File Creation Report feature was added to 
eliminate the need for using usernames and passwords to ensure validity of 
transferred logger files. However, some existing customers with VL-Series log-
gers prefer to use these usernames and passwords. To enable vLog to prompt 
the user for username and password during a logger file transfer for verifica-
tion, select the 

Prompt for username and password when transferring sam-

ples

 checkbox. 

Note: 

  THIS SECURITY OPTION IS NOT RECOMMENDED.

THIS SECURITY OPTION DOES NOT APPLY TO BATCH 
TRANSFERS.

To configure the username and password prompting option - NOT 

RECOMMENDED:

1. Select 

Tools>Options,

 then choose the 

Transfer

 tab.

2. Select the 

Prompt for username and password when transferring sam-

ples 

checkbox.

3. Click 

OK

.

For more on verifying graphs using this feature, see 

Verifying a Graph - Old 

Method Not Recommended

 on page 73.

Summary of Contents for vLog 4.4

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands