VERITEQ vLog 4.4, User Manual

Page: 46 / 112

Getting Started
40
6. Advanced: If your installation includes very long thermocouple cables,
Veriteq may recommend you specify a temperature offset. Enter it here. All
values will be adjusted by this offset.
7. Click OK to save or Cancel to close without saving.
Clearing Logger Samples
Clearing a logger deletes all recorded samples in a logger’s memory.
You can clear the data logger without making any setup changes, or as an es-
sential part of the following logger setup functions:
• Enabling or disabling channels
• Changing Start Mode settings
• Changing logger sample intervals
Note: You do not have to clear the data logger samples before you start a new
logging session, but doing so minimizes the storage of unneeded infor-
mation.
To clear the logger without changing the logger setup:
1. Select Logger > Clear... .
2. In the Confirm System Time window, check the system time.
If the time shown is correct, click OK .
If the time shown is incorrect, click Cancel , and then use the Windows
Control Panel to make the appropriate changes. See Setting System Date
and Time on page 55.
Note: The PC's date and time must be accurate when clearing a data log-
ger’s memory or the date and time values in future logger files may
be incorrect.
After you click OK , a confirmation window opens.