VeriFone Carbon 8, Installation Manual

Page: 15 / 48

S
ETUP
Periodic Inspection
C
ARBON
8 I
NSTALLATION
G
UIDE
15
R
EV
IS
IO
N
A
.1
2
Remove and inspect the following items:
•
Carbon 8 device
•
Stand
•
Printer
•
Power pack
•
Ethernet cable
•
Paper roll
Refer to Accessories and Documentation for more information about the
device’s related accessories.
3
Remove all plastic wrapping from the terminal and other components.
4
Remove the clear protective film from the displays.
5
Save the shipping carton and packing material for future repacking or moving
of the device.
Periodic
Inspection
Periodically inspect the Carbon 8 terminal for possible tampering. Signs of
tampering include:
•
Wires protruding out of the device.
•
Foreign objects inserted into the smart card slot or magnetic stripe slot.
•
Signs of damage to the tamper-evident labels.
•
A Tamper Warning message on the device displays.
If any device is found in tamper state, please remove it from service immediately,
keep it available for potential forensics investigation, and notify your company
security officer and your local Verifone representative or service provider. For
contacting Verifone, please see “
Service and Support ”.
NOTE
Verifone ships variants of the Carbon 8 for different markets. Your unit may have
different options or accessories described in this section.
WARNING
Do not use a unit that has been tampered with or otherwise damaged. This unit
comes equipped with tamper-evident labels. If a label or component appears
damaged, immediately notify the shipping company and your Verifone
representative or service provider.