21 / 43
LOW LIGHT LIMIT
IRIS LEVEL
AGC LEVEL
BRIGHT LEVEL
ADDITIONAL sub-menu - Other program settings.
ADDITIONAL
IR SW MODE
AUTO IR
STATUS
COLOR
AUTO IRIS
ON
SHARPNESS
ON
SHARPNESS
LEVEL 5
AUTO WHITE BALANCE
AUTO
R GAIN
214
B GAIN
164
BACK
Screen 9: Additional Sub-Menu
Option
Value
Explanation
IR SW MODE
AUTO/MANUAL
The opening and closing of the IR filter which adjusts the
Day & Night vision of the camera may be controlled in
MANUAL
mode. The
MANUAL
option enables the possibility
to adjust the
IR STATUS
parameter (color, B/W ). In
AUTO
mode, the switch is automatic according to the lighting.
IR STATUS
COLOR, B/W
Day & Night camera configuration.
AUTO IRIS
ON/OFF
The auto IRIS may operate automatically (
ON
) or at a
predetermined level in the
“
IRIS LEVEL
” menu. If
enabled manually, this function will remain operative until
the camera performs an angular movement of less than
15 degrees. It will switch automatically.
SHARPNESS
ON/OFF
The sharpness of the image may be adjusted
automatically (
ON
) or to a level defined in the
“
SHARPNESS LEVEL
” menu.
SHARPNESS LEVEL
0 ~ 15
Sharpness can be programmed in the range from 1 to 15
(15 corresponds to maximum sharpness).
AUTO WHITE BALANCE
ATW
White Balance (WB) is performed in auto tracking mode
(Auto Tracking White).
This mode automatically
balances the white level by analyzing a wide range of
colors, i.e. all those with temperatures comprised in the
range between 2000K and 10000K.
AUTO
This mode automatically adjusts the white balance by
analyzing a more restricted range with respect to the
previous option i.e. those with temperatures in the range
from 3000K and 7500K.
OUT
This function automatically balances the whites for
outdoor use.
IN
This function automatically balances the whites for indoor
use.
MAN
In this mode, white balancing may be performed by
manually selecting the amount of red (R GAIN) and blue
(B GAIN).
R GAIN
0 ~ 255
Adjust the red components using these values.
B GAIN
0 ~ 255
Adjust the blue components using these values.
Table 7
4.5.3.2.
MOTION