10 / 43
r dome
Pic. 21
Step 4.
Install lowe
Pic. 22
Take out a screw from lower dome. Link cables, screw, and lower dome. See Pic. 22.
Pic. 23
Line up the snaps on trim ring with the mounting screws on the back box. Snap the trim ring into the plastic snap washers
on the mounting screws. See Pic. 23.
3.2.3. SURFACE MOUNT INSTALLATION
Step 1.
Install back board of surface mount
Pic. 24
Locate the back board of the camera location. Drill a hole in the ceiling using a drill. Insert the screw and back board into
the hole. See Pic. 24
Pic. 25
Press the thumb fastener and open the hinged door to the back box. Take out hole of pin. See Pic. 26.
