Veilux VP-F18X, Installation And User Manual

Page: 26 / 47

23 / 43
Table 8
SET SCAN submenu
This includes a number of settings related to the programming of horizontal
FRAME SCAN
limits.
1) Press
“►” on “
SET SCAN STOPS
”.
2) Press
OPEN
to confirm.
3) Go to the required position with the joystick to set the left scanning limit.
4) Press
OPEN
to confirm.
5) Go to the required position with the joystick to set the right scanning limit.
6) Press
OPEN
to confirm, Press
CLOSE
to cancel the operation.
7) Point the curso
r “►” to “
CLEAR SCAN STOPS
” and press
OPEN
to delete the programmed positions.
SET AZIMUTH ZERO submenu
This includes the settings related to programming of the pan zero position.
1)
Go to the required position with the joystick to set zero position.
2) Press
OPEN
to confirm; Press
CLOSE
to cancel the operation.
CLEAR AZIMUTH ZERO submenu
This includes the settings related to deleting the pan zero position.
1)
Press
OPEN
to confirm.
2) Press
CLOSE
to cancel the operation.
4.5.3.3. POWER UP
POWER UP
POWER UP ACTION NONE
BACK
EXIT
Screen 11: Power UP Sub-Menu
Option Value Explanation
POWER UP ACTION
NONE
No action is performed at the end of power up.
AUTO SCAN
The camera performs an auto scan at the end of power up: the
camera performs a 360 horizontal scan operation.
RANDOM SCAN
The camera performs a random scan at the end of power up:
the camera performs a random 360° scan pausing for
approximately 2
” every 142°.
FRAME SCAN
The camera performs a frame scan at the end of power up:
the horizontal scan is performed in the
SET SCAN
limits.
PRESET 1/ PRESET 8
The camera goes to preset 1 or 8 at the end of power up.
PATTERN 1 ~ 4
The camera performs one of the 4 patterns at the end of
power up.
CRUISE
The camera performs a cruise at the end of power up: the
camera runs a cycle consisting of up to 30 preset positions.
HOME N TRA
The camera goes to preset 1 and starts tracking at the end of
power up.
CRUISE TRA
The camera performs a cruise with tracking on at the end of
power up.
Table 9
4.5.3.4. PRESETS

The camera will start a scanning cycle when a presetting or pattern is recalled. This scanning cycle may be
interrupted simply by moving the joystick.