28 / 43
ADDR SETTING
ADDR TYPE
HARD
ADDR SOFT
255
ADDR HARD
0
BACK
EXIT
Screen 20: Alarm Settings
The soft address is the address programmed by built-in software. The hard address is the address programmed by the
hardware SWITCH 2.
Option
Value
Explanation
ADDR TYPE
SOFT, HARD
This option is used to program the type of address in current
application.
Press the
OPEN
button and use the joystick to select the value.
Press
OPEN
to confirm.
ADDR SOFT
0~255
The option is used to change the soft address.
ADDR HARD
This option shows the hard address number. It is the address
of the SW2 (Switch Setting 2).
Table 16
The camera needs a reboot for the new address to take effect. When the hard address is different from that of
last power up, the hard address will be applicable and the camera address will be hard type.
4.5.4.3.
PASSWORD
PASSWORD
ENABLE PASSWORD
OFF
<EDIT PASSWORD>
BACK
EXIT
Screen 21: Password Sub-Menu
Option
Value
Explanation
ENABLE PASSWORD
ON/OFF
This enables the password.
EDIT PASSWORD
This is the password entry procedure.
Table 17
The password is a numeric combination (max. 10 digits).
The default password is
“0000”.
It is advisable to change the default password to prevent intrusions.
Do not lose or forget the programmed password.
Take note of the new password and keep it in a safe place.
INPUT OLD PASSWORD
PASSWORD
1 2 3 4 5 6 7 8 9 0
CLEAR
ENTER
BACK
Screen 22: Edit Password
1)
Select the password digits by moving the joystick in the horizontal direction. Symbol
“▲” indicates the digit which will
be entered.
2)
Press
OPEN
to enter the selected digit.
3)
The entered numbers will be replaced by a
“*” symbol on the screen for privacy.
