6 / 43
Pic. 6.
e back box. Take out hole of pin. Screw the me
To install the ptz camera with no power box, install the bracket directly onto the wall and then go to Pic 6.
Pic. 4
Pull the cables (of video, alarm, control etc.) through the cable hole of the power box and do necessary connections. The
cables are supplied by user.
Pic. 5
Refer to the instructions supplied with the bracket. Take out cables for the dome through the bracket. And install the
bracket to the power box. See Pic. 5
Pic. 6
Press the thumb fastener and open the hinged door to th
tal cover into the
bracket. See
Pic. 7
Connect cables to hole of pin. Insert the pin inside the back box. When finished, close the door to the back box and turn
on the power. The LED will light up. See Pic. 7.
If the LED does not light up, refer to Section 5: Trouble Shooting.
Step 2.
Install dome drive
