50
7 Set up with the display and adjustment module
VEGAFLEX 82 • 4 … 20 mA/HART - two-wire
44222-EN-170220
Menu - Diagnosis
Menu
Menu item
Default value
Diagnostics
Status signals - Function control
Switched on
Status signals - Out of specification
Switched off
Status signals - Maintenance
Switched on
Diagnostics
Device memory - Echo curve memory
Stopped
Device memory - Measured value memory
Started
Device memory - Measured value memory -
Measured values
Distance level, percentage val-
ue level, reliability level, electronics
temperature
Device memory - Measured value memory - Re-
cording in time interval
3 min.
Device memory - Measured value memory - Re-
cording with measured value difference
15 %
Device memory - Measured value memory - Start
with measured value
Not active
Device memory - Measured value memory - Stop
with measured value
Not active
Device memory - Measured value memory - Stop
recording when memory is full
Not active
Menu - Additional adjustments
Menu
Menu item
Default value
Additional settings
PIN
0000
Date
Actual date
Time
Actual time
Time - Format
24 hours
Probe type
Device-specific
HART mode
Analogue current output
The instrument settings are copied with this function. The following
functions are available:
•
Read from sensor: Read data from sensor and save in the display
and adjustment module
•
Write to sensor: Save data from the display and adjustment mod-
ule back into the sensor
The following data or settings for adjustment of the display and ad-
justment module are saved:
•
All data of the menu "
Setup
" and "
Display
"
•
In the menu "
Additional adjustments
" the items "
Reset, Date/Time
"
•
Special parameters
Additional settings - Copy
instrument settings