52
7 Set up with the display and adjustment module
VEGAFLEX 82 • 4 … 20 mA/HART - two-wire
44222-EN-170220
In menu item "
Current output, variable
" you specify which measured
variable the current output refers to.
In menu item "
Current output, adjustment
" you can assign a respec-
tive measured value to the current output.
In this menu item you can select the type and size of your probe from
a list of all possible probes. This is necessary to adapt the electronics
optimally to the probe.
The sensor is permanently set to the HART mode "
Analogue current
output
". This parameter cannot be modified.
The default setting is "
Analogue current output
" and the address 00.
In this menu item you gain access to the protected area where
you can enter special parameters. In exceptional cases, individual
parameters can be modified in order to adapt the sensor to special
requirements.
Change the settings of the special parameters only after having con-
tacted our service staff.
In this menu, you read out the instrument name and the instrument
serial number.
Additional settings -
Current output - Current
output, meas. variable
Additional settings - Cur-
rent output, adjustment
Additional settings -
Probe type
Additional adjustments -
HART mode
Additional settings - Spe-
cial parameters
Info - Instrument name