11
3 Product description
VEGAFLEX 82 • 4 … 20 mA/HART - two-wire
44222-EN-170220
You can find further information in the operating instructions "
Interface
adapter VEGACONNECT
" (Document-ID 32628).
The VEGADIS 81 is an external display and adjustment unit for VEGA
plics
®
sensors.
For sensors with double chamber housing the interface adapter
"
VEGADIS adapter
" is also required for VEGADIS 81.
You can find further information in the operating instructions
"
VEGADIS 81
" (Document-ID 43814).
The VEGADIS adapter is an accessory part for sensors with double
chamber housings. It enables the connection of VEGADIS 81 to the
sensor housing via an M12 x 1 plug.
You can find further information in the supplementary instructions
"
VEGADIS adapter
" (Document-ID 45250).
VEGADIS 82 is suitable for measured value indication and adjustment
of sensors with HART protocol. It is looped into the 4 … 20 mA/HART
signal cable.
You can find further information in the operating instructions
"
VEGADIS 82 4 … 20 mA/HART
" (Document-ID 45300).
The protective cover protects the sensor housing against soiling and
intense heat from solar radiation.
You will find additional information in the supplementary instructions
manual "
Protective cover
" (Document-ID 34296).
Screwed flanges are available in different versions according to the
following standards: DIN 2501, EN 1092-1, BS 10, ASME B 16.5,
JIS B 2210-1984, GOST 12821-80.
You can find additional information in the supplementary instructions
manual "
Flanges according to DIN-EN-ASME-JIS
".
The electronics module VEGAFLEX 80 series - SIL is a replacement
part for TDR sensors of the VEGAFLEX 80 series with SIL qualifica-
tion. Electronics modules with SIL qualification must only be replaced
by identical electronics modules.
You can find further information in the operating instructions manual
"
Electronics module VEGAFLEX series 80
".
The display and adjustment module can be optionally replaced by a
display and adjustment module with heating function.
You can use this display and adjustment module in an ambient tem-
perature range of -40 … +70 °C.
You can find further information in the operating instructions "
Display
and adjustment module with heating
" (Document-ID 31708).
If the standard sensor housing is too big or in case of strong vibra-
tions, an external housing can be used.
VEGADIS 81
VEGADIS adapter
VEGADIS 82
Protective cover
Flanges
Electronics module
Display and adjustment
module with heating
External housing