12
3 Product description
VEGAFLEX 82 • 4 … 20 mA/HART - two-wire
44222-EN-170220
Then the sensor housing is made of stainless steel. The electronics is
located in the external housing which can be mounted in a distance of
up to 10 m (147 ft) to the sensor by using a connection cable.
You can find additional information in the operating instructions
manual "
External housing
" (Document-ID 46802).
If you are using an instrument with rod version, you can extend the
rod probe individually with curved segments and rod and cable exten-
sions of different lengths.
All extensions used must not exceed a total length of 6 m (19.7 ft).
The extensions are available in the following lengths:
Rod: ø 16 mm (0.63 in)
•
Basic segments: 20 … 5900 mm (0.79 … 232 in)
•
Rod/cable segments: 20 … 5900 mm (0.79 … 232 in)
•
Curved segments: 100 x 100 mm (3.94 … 3.94 in)
You can find further information in the operating instructions manual
"
Rod and cable components VEGAFLEX 80 series
".
If you mount the VEGAFLEX 82 in a bypass tube or standpipe, you
have to avoid contact to the bypass tube by using a spacer at the
probe end.
You can find additional information in the operating instructions
manual "
Centering
".
Rod components
Centering