Vega FiberFlex LFXG-H, Operating Instructions Manual

Page: 70 / 102

Advanced functions
68 LFXG-H Installation and Operation Guide
Test
Current Loop Test (milliamp output)
This mode manually forces the current output to a specified value. This is
useful for verifying the current loop calibration. To calibrate the current loop,
see Chapter 3: “Calibration”.
Procedure 4.5: To perform a current loop test
ailable:
1. Select Diagnostics | Test | Current Loop Test .
2. Click Enter .
3. Remove the gauge from control.
4. Enter the current loop test value.
5. Click OK .
The transmitter functions in this mode until it times out (1 hour), or
you click
Exit and OK .