Chapter 3 Connecting Optional Accessories
VCON MediaConnect 9000 Installation & Setup Guide
3-3
3.2
Connecting a VCR for Recording the
Videoconference
The MediaConnect 9000 system supports the recording of a videoconference. The
system must be operating in Dual or Triple Monitor mode in order to record.
➤
To connect a VCR to the videoconferencing board’s panel for recording
1. Connect the yellow-jack cable between the VIDEO IN connector of the
VCR and the
VCR VID OUT
(yellow) connector of the
videoconferencing card.
2. Connect the VCR cable with the white jacks between the AUDIO IN
connector of the VCR and the
VCR AUD OUT
(black) connector of the
videoconferencing card.
For specific instructions on installing and operating the VCR, see its accompanying
user’s guide.
Connecting to VCR for Recording Videoconferences
CAUTION
Make sure that the computer and the VCR are turned off.
