Chapter 2 Connecting the MediaConnect 9000
2-14
VCON MediaConnect 9000 Installation & Setup Guide
Connecting the MediaConnect 9000 to the Power Supply
After you completed all the MediaConnect 9000’s components connections, you
can connect the MediaConnect 9000 to a 115 Vac or 230 Vac power supply,
depending on the local power line.
➤
To connect the MediaConnect 9000 to a power supply
1. Below the power socket on the rear panel of the unit, change the voltage
setting to 115 Vac or 230 Vac if necessary.
115/230 Volt Power Setting
2. Insert the power cable into the power socket on the rear panel.
3. Insert the plug into the power supply.
CAUTION
The factory default setting corresponds to the voltage of the
electricity supply of your region. As a precaution, check that
the setting is correct before starting MediaConnect 9000.