79
Keys, doors, bonnet
Using the universal radio control system
With the ignition on, press the required
universal radio control button, and the
control indicator in the mirror housing will
illuminate. The pre-programmed system
can now be operated using the universal
radio control system.
Reprogramming individual
button settings
If a button that has already been
programmed is to be used for a different
system, repeat steps 3 to 5 of the basic
programming procedure described
previously.
Clearing down all programmed button
settings
Before selling the vehicle, it is a good idea
to erase button settings.
Button settings can only be erased all at
once. It is not possible to erase individual
button settings. Buttons can, however, be
individually reprogrammed, see
"Reprogramming individual button
settings".
In order to erase the programming of all
3 buttons, press both outer buttons and
release as soon as the LED begins to flash
(after approx. 20 seconds). All button
settings have now been cleared and can be
programmed anew at any time.
Note
Keep replaced manual transmitters for
possible reprogramming. The manual
transmitters can also continue to be used.
If after repeatedly performing the above
steps a system fails to respond to the
universal radio control, consult a workshop.
We recommend that you consult your
Vauxhall Authorised Repairer.
During programming, the vehicle should be
within the range of the receiver. Under no
circumstances should the vehicle be in the
movement zone of a system (e.g. garage
door).
Do not programme an system without an
automatic safety stop (manufactured
before April 1982).
Take note of the system manufacturer’s
safety instructions for drives and manual
remote control units.
Ofrecido por www.electromanuales.com
Summary of Contents for 2007 Vectra
