259
Self-help
Picture no: 17767j.tif
2. Detach plug connector from bulb
mounting.
3. Press the two retaining lugs on outer
edges of bulb mounting towards each
other and remove bulb mounting.
Bulbs from top to bottom:
Turn signal light
Tail light/brake light
Tail light
Fog tail light
Reversing light
4. Remove bulb from socket.
5. Insert new bulb without touching the
glass. Fit bulb mounting into bulb
housing. Connect plug. Close stowage
compartment.
Picture no: 17768j.tif
Estate
1. Open the compartment on the left or
right-hand side by pressing the latch
down – see page 235.
2. Hold the bulb housing from the outside,
use a wheel bolt spanner
3
to loosen the
retaining nuts and unscrew them by
hand. Remove the bulb housing to the
rear. Wheel bolt spanner
3
– see vehicle
tools, page 238.
3. Detach the cable from the bulb housing.
6
Ofrecido por www.electromanuales.com
Summary of Contents for 2007 Vectra
