177
Easytronic
Picture no: 17925j.tif
Interruption of power supply
The clutch is not disengaged if the vehicle
battery is discharged and a gear has been
selected. The vehicle cannot move.
If the battery is flat, start the vehicle using
jump leads – see page 230.
If the cause of the interruption to the power
supply is not the discharged battery,
consult a workshop. We recommend your
Vauxhall Authorised Repairer. If the vehicle
has to be removed from moving traffic,
release clutch as follows:
1. Apply hand brake and switch off
ignition.
2. Open bonnet.
3. Clean Easytronic around the cap (see
figure 17925 J) so that no dirt can get
into the opening when the cap is
removed.
4. Rotate cap to slacken and remove by
lifting upwards – see figure 17925 J.
5. Turn the adjusting screw clockwise using
a flat-head screwdriver (vehicle tools
3
–
see page 238) until clear resistance can
be felt. The clutch has now been
disengaged.
Do not turn beyond the resistance, since
this can damage the Easytronic.
6. Fit cleaned cap again. The cap must be
in full contact with the housing.
Towing the vehicle and starting the engine
is not permitted when the clutch has been
released in this way, although the vehicle
can be moved a short distance.
Consult a workshop immediately. We
recommend your Vauxhall Authorised
Repairer.
Ofrecido por www.electromanuales.com
Summary of Contents for 2007 Vectra
