207
Drive Control Systems
Once the ignition is switched on, the system
is operational and will continuously
monitor the tyre pressures at speeds of
approx. 20 mph (30 km/h) and above
.
Tyre pressure – see pages 215, 299.
Picture no: 17334t.tif
Display of current tyre pressure
3
Select menu item
Tyres
from the
Board
Computer
menu.
The current pressure of each tyre is
displayed.
Picture no: 17713j.tif
Control indicator
w
in red
as
warning message
Illumination in red while driving indicates
deviating tyre pressure.
Indicator illuminates red
Minor tyre pressure difference; slow down.
Check tyre pressure at next opportunity
with a suitable gauge and correct if
necessary.
Indicator flashes red
Considerable pressure difference or direct
loss of pressure! Stop immediately and
check tyre and tyre pressure. Fit spare
wheel if necessary, see pages 236, 238.
9
Warning
The tyre pressure monitoring system does
not replace manual checks with a
suitable gauge.
Check tyre pressures at least every
14 days and prior to any long journey;
the tyres should be checked when cold.
Don’t forget to check the spare
3
.
Ü
Board Computer
BC 1
BC 2
Timer
Tyres
Ofrecido por www.electromanuales.com
Summary of Contents for 2007 Vectra
