239
Self-help
z
Take the spare wheel from the luggage
compartment.
z
Before raising the vehicle, set the front
wheels to the straight-ahead position.
z
Slacken the wheel bolts one half turn
before raising the vehicle, but do not
totally unscrew the bolts.
z
Never change more than one wheel at
once.
z
Block the wheel diagonally opposite the
wheel to be changed by placing wedge
blocks or equivalent in front and behind
the wheel.
z
Use the jack only to change wheels.
z
If the ground on which the vehicle is
standing is soft, a solid board (max. 1 cm
thick) should be placed under the jack.
Using a thicker board could damage the
jack and the vehicle.
z
Apply a light coating of grease to the
cone of each wheel bolt before screwing
in the wheel bolts after a wheel change.
Some normal commercial grease will be
required for this purpose. We
recommend your Vauxhall Authorised
Repairer.
z
No people or animals may be in the
vehicle when it is jacked up.
z
Never crawl under a jacked-up vehicle.
z
Do not start or run the engine while the
vehicle is on the jack.
z
Fully tighten the wheel bolts after
lowering the vehicle all the way.
Picture no: 17743j.tif
1. Prise off the wheel trim using the hook
included with the vehicle tools
3
. For
vehicle tools, see page 238.
If the wheel trim has visible wheel
bolts
3
, the trim can remain on the
wheel. The retaining washers
3
on the
wheel bolts must not be removed.
Ofrecido por www.electromanuales.com
Summary of Contents for 2007 Vectra
