80
Keys, doors, bonnet
Picture no: 17553j.tif
Bonnet
To open the bonnet, pull the release lever
located on the driver’s side below the
instrument panel. The bonnet will then be
unlocked and will partially open. Return
release lever to its original position.
Picture no: 17554j.tif
There is a safety catch on the underside of
the bonnet: lift this upwards and open the
bonnet.
When the bonnet is opened, snow or dirt on
the bonnet can slide down and obstruct the
air intake. Air intake – see page 168.
Picture no: 17555j.tif
To hold the bonnet open, insert the support
located on the left side in the small slot on
the underside of the bonnet.
Before closing, fasten the support in its
retainer. Lower the bonnet and allow it to
fall into its catch.
Check that the bonnet is locked in position
by pulling at its front edge. If it is not
engaged, repeat the procedure.
Ofrecido por www.electromanuales.com
Summary of Contents for 2007 Vectra
