132
Lighting
Picture no: 17128t.tif
Door-to-door illumination
The dipped beam and the reversing lights
illuminate for approx. 30 seconds after the
driver has exited the vehicle and closed his
door.
To activate function:
1. Switch off ignition.
2. Remove ignition key.
3. Open driver’s door.
4. Pull turn signal stalk toward steering
wheel.
5. Close driver’s door.
If the driver’s door is left open, the lights will
go out after two minutes.
The light is switched off immediately by
inserting the key into the ignition or pulling
the turn signal stalk again with the driver’s
door open.
Picture no: 17129t.tif
Parking lights
The front parking light and tail light of one
side of the vehicle can be activated when
parking:
1. Set light switch to
7
or
AUTO
3
.
2. Ignition off.
3. Move turn signal stalk all the way up
(right parking light) or down (left parking
light).
An acoustic signal sounds and control
indicator
O
illuminates briefly in the
instrument panel to indicate activation.
Remove the ignition key before leaving the
vehicle.
To switch it off, switch on the ignition or
move the turn signal stalk in the opposite
direction.
Ofrecido por www.electromanuales.com
Summary of Contents for 2007 Vectra
